Samsung AM JNHF Series User Manual page 32

Setting an indoor unit address and installation option
Setting an indoor unit address (MAIN/RMC)
1.
Check whether power is supplied or not.
- W hen the indoor unit is not plugged in, there should be additional
power supply in the indoor unit.
2.
The panel(display) should be connected to an indoor unit to receive option.
3.
Before installing the indoor unit, assign an address to the indoor unit according to the air
conditioning system plan.
4.
Assign an indoor unit address by wireless remote controller.
- The initial setting status of indoor unit ADDRESS(MAIN/RMC) is "0A0000-100000-200000-300000".
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option
SEG1
Explanation
PAGE
Remote
Controller
Display
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
Indication
and Details
0
Option
SEG7
Explanation
PAGE
Remote
Controller
Display
Indication Details
Indication
and Details
1
• When "A"~"F" is entered to SEG5~6, the indoor unit MAIN ADDRESS is not changed.
• If you set the SEG 3 as 0, the indoor unit will maintain the previous MAIN ADDRESS even if you
CAUTION
input the option value of SEG5~6.
• If you set the SEG 9 as 0, the indoor unit will maintain previous RMC ADDRESS even if you input
the option value of SEG11~12.
• You cannot set SEG11 and SEG12 as F value at the same time.
32
SEG2 SEG3
Mode Setting Main address
No Main
0
address
Main
A
address
1
setting
mode
SEG8 SEG9
Setting RMC address
__ Indication Details
No RMC
0
address
RMC
address
1
setting
mode
SEG4 SEG5
100-digit of indoor 10-digit of indoor
unit address unit
0~9 100-digit 0~9
SEG10 SEG11
Group channel(*16)
__ Indication Details Indication Details
RMC1
Indoor Unit
1(L)
F2
2(N) F1
SEG6
The unit digit of
an indoor unit
A unit
10-digit 0~9
digit
SEG12
Group address
0~F RMC2 0~F