Planet Networking & Communication IPM-16120 User Manual page 40

Appendix A: Resetting to Default via
Users who forget the network account and password of the product can press "Reset" to recover to the
factory default values, and the device will be rebooted at the same time.
Step 1. In Network info press the Navigation button for 10 seconds until two beeps sound to enter
"Set back to factory default values".
Step 2. Select Reset Account & IP, admin account and password will be set as admin (add a new
account if there's no admin account). Device IP will be automatically acquired through DHCP (if
there's no DHCP server, the device IP should be preset to 192.168.0.10). The acquired IP is
then displayed on the LCD panel.
Step 3. Select Reset All to clear all the data of the device.
Navigation Button
40
- -
IP-based 16-port Metered Power Distribution Unit
IPM-16120