Planet Networking & Communication IPM-16120 User Manual page 23

Parameters
Enabled DHCP
Host
Subnet Mask
Gateway
MAC
Ping Test
Parameters
Primary DNS Server
Secondary DNS
Server
Parameters
Enabled Http
Enabled Https
Http Port
Https Port
Use checkbox to enable DHCP. It will assign IP address.
Assign the Network IP address for the power switch.
Set up the subnet mask info of this equipment.
Set up the gateway port of this equipment.
Display MAC address.
Confirm whether the device with the IP address or DNS name is
connected to the network.
Configure the IP and DNS server addresses for Network Adapter 1.
Configure the IP and DNS server addresses for Network Adapter 2.
Allows browser to connect with smart monitor by HTTP.
Allows browser to connect with smart monitor by HTTP SSL.
Provides browser to communicate by HTTP with smart monitor.
Provides browser to communicate by HTTP SSL with smart monitor.
23
- -
IP-based 16-port Metered Power Distribution Unit
Description
Description
Description
IPM-16120