Planet Networking & Communication IPM-16120 User Manual page 27

Parameters
SNMP v1/v2 Enable
SNMP Port
Read Community
SNMP Writing
Write Community
Parameters
SNMP v3 Enable
User Name
Type
Authorization Type
Authorization
Password
Private Type
Private Password
Enable SNMP v1/v2.
Set the destination port. Default is 161.
Key-in passwords for the Community Name field. Default is public.
Select the checkbox to enable SNMP Write-in.
Key-in passwords for the Community Name field. Default is private.
Enable SNMP v3.
The name is SNMP v3 command.
There are two types: Read Only, Read and Write.
There are two types: MD5 or SHA.
The password of authorization type. Use MD5 or SHA.
There are two types: No or DES.
For private password, use DES. Select DES type to key-in password.
27
- -
IP-based 16-port Metered Power Distribution Unit
Description
Description
IPM-16120