Wolf 802727 Installation Instructions

W W
O L F A R M I N G
I
N S T A L L A T I O N
Front Panel Kit Model Numbers:
• 802505 – WDFRONT / S –
Classic Stainless Steel
• 802506 – WDFRONT / B –
Carbon Stainless Steel
• 802507 – WDFRONT / P –
Platinum Stainless Steel
• 802727 – WDFRONT / I –
Integrated Front Panel for
Wood Front
Handle Assemblies Available:
(for use with 802727)
• 802781 – Stainless Handle
Assembly
• 802782 – Black Handle Assembly
• 802783 – Platinum Handle
Assembly
Handle assemblies include handle,
stand-offs and mounting screws.
23"
(58.4)
29 / "
7
8
(75.9)
Warming drawer overall dimensions
D
R A W E R
I
N S T R U C T I O N S
The Wolf Warming Drawer Model
WD30 can be installed above or
below a single wall oven SO30F/S,
SO30U/B, SO30U/P or SO30U/S or
below cooktop CT36E/S, CT36E/B,
CT36E/P, CT36G/S, or CT36G/P.
Please refer to installstion instructions
provided with cooktops for additional
installation information.
The Wolf Warming Drawer can also
be installed next to or above another
Wolf Warming Drawer.
IMPORTANT NOTE: This Front Panel
Kit is designed for and approved only
for use with Wolf Warming Drawer
WD30.
The cabinet or wall opening must be
within the following dimensions:
Height – 9
Width – 28
Depth – 23
Refer to the Use and Care Informa-
tion and Installation Instructions
included with Model WD30.
10 1 / "
4
(26.0)
2" x 2" anti-tip
block against
rear of cutout
10 7 / "
8
(27.6)
9 1
(23.5)
allow for
5 / "
overlap
8
on all sides
Warming drawer installation specifications
F P
R O N T A N E L
1
/ "
4
1
/ "
2
1
/ "
2
23 1 / " 2 3 /
4" 2
(59.7) (6.0)
(10.2)
E
5"
(12.7) 9 1 /
4
(23.5)
/ "
4
1"
min
(2.5)
28 1 / "*
2
(72.4)
* Dimension may vary
by +
1 / " (.3 cm)
8
K
I T
IMPORTANT NOTE: Please read
these instructions carefully
before beginning installation.
Parts Included with Front Panel
Assembly:
• Front panel
• Six color coordinated screws for
front panel.
• Handle and standoffs (not included
with 802727).
• Four handle mounting screws
(not included with 802727).
• Four color coordinated trim pieces
(not included with 802727).
• Six color coordinated trim mount-
ing screws (not included with
802727).
"
8
"