Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BLAUBERG Ventilatoren SE Vento Expert W
Summary of Contents for BLAUBERG Ventilatoren SE Vento Expert W
- Page 1 SenSor control panel with integrated wi-Fi SE Vento Expert W USER'S MANUAL...
-
Page 2: Table Of Contents
Control ......................................... 7 This user’s manual is a main operating document intended for technical, maintenance, and operating staff. The manual contains information about purpose, technical details, operating principle, design, and installation of the SE Vento Expert W unit and all its modifications. -
Page 3: Purpose
SE Vento Expert W www.blaubergventilatoren.de • Disconnect the unit from power mains prior • Do not allow children to operate the unit. to any technical maintenance. • Do not store any explosive or highly • When the unit generates unusual sounds,... -
Page 4: Technical Data
SE Vento Expert W www.blaubergventilatoren.de TECHNICAL DATA DIMENSIONS Supply voltage, 50 (60) Hz [V] 110-230 Control panel Maximum current [A] 0.012 42.5 mm 86 mm 82 mm Cable type 2х0.35 mm 13.5 mm 60 mm Temperature range [°C]... - Page 5 SE Vento Expert W www.blaubergventilatoren.de Example 2: connection via a router with a single Wi-Fi access point. The control panel can be installed outside the range of the Wi-Fi access point built into the master ventilator. • Connect the router to the access point built into the router (see the ventilator user’s manual).
- Page 6 SE Vento Expert W www.blaubergventilatoren.de 1. Install the mounting box. Installation inside a wall: make a niche in the wall, route the Installation on a wall surface: route the necessary wires and necessary wires and cables to the control panel mounting cables to the control panel mounting location, drill holes location and secure it in place.
-
Page 7: Control
SE Vento Expert W www.blaubergventilatoren.de CONTROL The master ventilator is controlled by means of the buttons on the touch-sensitive control panel. Ventilator connection status indicator. The indicator glows steadily while the ventilator connection is live. These buttons are used to enable/disable the ventilator, and select speed 1, 2 or 3. The buttons remain dark in the Standby mode. - Page 8 www.blaubergventilatoren.de B133-2EN-02...
Need help?
Do you have a question about the SE Vento Expert W and is the answer not in the manual?
Questions and answers