Clock Set; Setting The Clock - JVC HR-S5965EK Instructions Manual

52 advanced features

Clock Set

You should only need to perform this function if:
• Auto Clock Set was not performed correctly by Auto Setup, Preset Download or Auto Channel
Set
• The VCR's memory backup has expired
• You want to change the Just Clock setting

Setting the Clock

get to the initial set screen
and
PR
get to the clock set screen
buttons and press
set time and date
and
PR
advance the time in 30 minute increments) and then press
(or E). The date will blink. Use the
set the correct date (pressing and holding will advance the date in
15 day increments) and then press
year in the same way and press
set just clock
then press
set preset for clock data source
specify a preset (station) for
buttons to select the preset and press
start clock operation
NOTE:
If the recorder's memory backup has expired or the AC was disconnected from the recorder, the
recorder will automatically perform Auto Clock Set when the power is restored.
Notes on Just Clock
Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use
this signal to update its internal clock (including the adjustment for British Summer Time). It will
do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to
enabling the VCR to do this.
Just Clock is not effective in the following circumstances:
• when the VCR is powered on
• when the VCR is in Timer or Auto Satellite Programme Recording modes
• when a difference of more than 3 minutes between the internal clock and the time signal exists.
• when reception conditions are poor.
buttons and press
PR
(or E).
When the
buttons to set the correct time (pressing and holding will
Set as desired using the
(or E).
JUST CLOCK
Press
Press . Move the highlight bar to
(or E).
Move the highlight bar to
screen appears, the time will be blinking. Use the
CLOCK SET
and buttons to
PR
PR
(or E). Set the correct
.
and buttons
PR
PR
If you have set
to take its source data from. Use the
(or E).
.
INITIAL SET
using the
CLOCK SET
TIME
0: 00
JUST CLOCK : ON
TV PR.
[1] a k
[MENU]: EXIT
to , you will need to
JUST CLOCK ON
PR
using the
and
PR
PR
PR
CLOCK SET
DATE YEAR
01 . 01 03
: 1
and
PR
ON , you are