JVC HR-S5965EK Instructions Manual page 38

38 advanced features
L-2 INPUT Setting
The connector accepts either a composite signal (regular video
L-2 IN/DECODER
signal) or a Y/C signal (a signal in which the luminance and chrominance signals
are separated). Set L-2 INPUT
signals of the connected unit.
get to the output/input set screen
using the
OUTPUT/INPUT SET
Move the highlight bar to
select mode
buttons. Press (or E) to select the desired mode:
FOR L-2 INPUT
• : If a connected device's output is
VIDEO
compatible only with regular
video signals, set to
• : If a connected device's output is
S-VIDEO
compatible with Y/C signals, set to
. This setting will let you
S-VIDEO
take advantage of higher-quality
S-VHS pictures. (For connection,
be sure to use a 21-pin SCART
cable that is compatible with the
Y/C signal.)
return to normal screen
to the appropriate mode depending on the output
Press
and buttons and press
PR
PR
L-2 INPUT
VIDEO .
Press .
. Move the highlight bar to
(or E).
using the and
PR
PR
OUTPUT/INPUT SET
L-1 OUTPUT VIDEO
L-2 INPUT VIDEO
[1] a k
[MENU]: EXIT