JVC HR-S5965EK Instructions Manual page 31

Super VHS (S-VHS), S-VHS ET and VHS
Your VCR can record in S-VHS, S-VHS ET or VHS.
To record in S-VHS:
Perform the steps below to set
indicator will light on the display panel. The S-VHS recording mode will be selected.
To record in S-VHS ET on a VHS cassette:
See 'Super VHS ET (S-VHS ET)' on page 30.
To record in VHS:
Insert a cassette marked 'VHS'. If the S-VHS ET indicator on the VCR is lit and the S-VHS ET
mode is activated, press
automatically selected regardless of the S-VHS mode setting.
To record in VHS on an S-VHS cassette:
Insert the cassette marked 'S-VHS', the S-VHS indicator will light on the display panel. Then,
perform the steps below to set the
recording mode will be selected.
get to the mode set screen
and buttons and press
PR
select s-vhs mode
(or E) to set to
return to normal screen
NOTE:
When playing back a tape that has been recorded in S-VHS or S-VHS ET, the S-VHS indicator
lights on the display panel regardless of the 'S-VHS' mode setting.
to . Then, insert a cassette marked 'S-VHS', the S-VHS
S-VHS ON
. The indicator goes off. The VHS recording mode will be
S-VHS ET
to
S-VHS OFF
Press . Move the highlight bar to
(or E).
Move the highlight bar to
or .
ON OFF
Press .
advanced features
; the S-VHS indicator will go out. The VHS
using the and
S-VHS
PR
using the
MODE SET
PR
buttons. Press
PR
31