The B.e.s.t. Picture System; Button On Vcr | Button — Same As - JVC HR-S5965EK Instructions Manual

32 advanced features
about b.e.s.t.
Works in SP and LP
modes
Works before Timer
Recording
B.E.S.T. data is lost
when tape is ejected
Pressing the T button on
VCR does not start Instant
Timer Recording while
B.E.S.T. is turned ON
Recording and Playback Using B.E.S.T.
recording
VCR spends about 7 seconds assessing the condition of the tape and then begins recording.
During B.E.S.T.
playback
based on the condition of the tape in use. B.E.S.T. is active during
Auto Tracking.
Avoiding B.E.S.T. Time Delay
Since B.E.S.T. introduces a 7 second delay before recording starts, you may wish to compensate by
first pressing | and T together (this puts the VCR into
the VCR performs the B.E.S.T. tape assessment) and then pressing . when you wish to start
recording.
The B.E.S.T.
Picture System
The Biconditional Equalised Signal Tracking (B.E.S.T.) System checks the
condition of the tape in use and compensates during recording and playback
to give the best picture quality possible. The default setting is ON.
Turning B.E.S.T. ON or OFF
get to the mode set screen
Move the highlight bar to
and buttons and press
PR
PR
select b.e.s.t. mode
using the
B.E.S.T.
(or E) to set
return to normal screen
Press and hold T and press . on the Remote Control (or press T on the VCR). The
S-VHS
VCR
a
pause of 7 seconds
Press .. The VCR adjusts the playback picture quality
appears on the VCR's display panel.
bESt
Press
MODE SET using the
(or E).
Move the highlight bar to
and buttons and press
PR
PR
or .
B.E.S.T. ON OFF
Press
a
B.E.S.T. complete
RECORD PAUSE
.
MODE SET
S-VHS ET
B.E.S.T.
F
PICTURE CONTROL
AUTO TIMER
O.S.D.
AUTO SP a LP TIMER
POWER SAVE
NEXT PAGE
[1] a k
[MENU]: EXIT
.
S-VHS VCR
mode during which time
OFF
ON
AUTO
OFF
ON
OFF
OFF
S-VHS
VCR