Aligning The Mainframe In Parallel To The Head Pulley Frame; Tightening The Pre-Cleaner - Martin PIT VIPER Installation Instructions Manual

5.2.6
5.2.7
© Martin Engineering GmbH

Aligning the mainframe in parallel to the head pulley frame

A
4
Fig. 7
Pos.
1 Head pulley
2 Head pulley frame
3 Blades
4 Chute wall
Tab. 4: Aligning the mainframe horizontally

Tightening the pre-cleaner

CAUTION! RISK OF DAMAGE!
Excess or uneven tightening of the belt cleaner on the conveyor
belt can cause material damage.
Always tighten the belt cleaners in accordance with the
specification and also ensure uniform tightening whenever dual
Inline-Reversing tensioners are used.
See the installation manual accompanying your Inline Reversing
tensioner for specific instructions on how to configure it (Section
2.1.4).
A = B
Description
20
1
2
B
3
M3735UK-09/15