Oven Light - Monogram ZKD90DSSN Owner's Manual

27" built-in electric wall oven
Hide thumbs Also See for ZKD90DSSN:
Table of Contents

Advertisement

Available languages

Available languages

CARE AND CLEANING

OVEN LIGHT

WARNING
SHOCK OR BURN HAZARD:
oven at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn.
CAUTION
BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot glass with
bare hands or a damp cloth can cause burns.
1. Disconnect power at the main fuse or circuit breaker
panel.
2. Remove oven racks.
3. Slide a flat blade screwdriver between the housing and
the glass light cover.
4. Support the glass light cover with two fingers to prevent
careful not to chip the oven coating.
5. Gently twist the screwdriver blade to loosen the glass
light cover.
6. Remove the glass light cover.
49-2000382 Rev.1
7. Remove the bulb by firmly grasping and sliding the
bulb straight out until the two prongs have cleared the
ceramic holder.
8. Do not touch the glass of the new replacement bulb
with your fingers. It will cause the bulb to fail when it
lights. Grasp the replacement bulb with a clean towel or
facial tissue with the prongs facing down. Align the two
prongs in the ceramic holder, pressing gently until the
bulb is securely in the ceramic socket.
9. Slide the protective lens into the holder and push until
the clips snap into the housing.
10. Reconnect power.
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zkd90dpsnZks90dpsnZks90dssn

Table of Contents