Assembling The Handles - Oster CKSTSK12S-TECO User Manual

Congratulations on your purchase of a Titanium Infused
DuraCeramic™ appliance!
This appliance features a Titanium-Infused DuraCeramic™ nonstick
natural ceramic coating which is 8X more durable than other
nonstick coatings. This means there's no flaking or peeling off to
worry about. Furthermore, the ultra-durable ceramic coating cooks
faster than other nonstick coatings, saving time and energy. The
natural Titanium- Infused DuraCeramic™ nonstick coating also offers
greater health and benefits as it's free of PTFE and PFOA. 8X More
Durable – Titanium-Infused DuraCeramic™!
LEARNING ABOUT YOUR STRAIN &
POUR ELECTRIC SKILLET
1
4b
6
1. Tempered glass lid *
2. Lid handle
3. Thumb pads
4. a) Large straining holes
4. b) Small straining holes
* These parts can be replaced on oster.com or by calling 1-800-334-0759
4 www.oster.com
2
3
4a
5
7
8
5. Cool-touch handles *
6. Pour spout
7. Temperature probe *
8. Temperature control knob
HOW TO:

ASSEMBLING THE HANDLES

NOTE: Do not use the skillet without
handles attached.
1. Unpack your unit and locate the
handles and 4 Phillips screws included.
2. Place the skillet face down onto a
clean, flat surface.
3. Place one handle onto the mounting
studs making sure the holes align with the holes under skillet
pan.
4. Using a Phillips-head screwdriver, attach 2 screws and flat
washers through holes in the leg into the skillet. Do not
overtighten.
CAUTION: Overtightening can result in stripping of screws or
nuts or cracking of handle or feet.
5. Repeat the procedure with the second handle.
6. Place the skillet on upright position.
www.oster.com
5