User Maintenance Instructions - Russell Hobbs RHT2RET Instructions And Warranty

User Maintenance Instructions

This appliance requires little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Any servicing that
requires disassembly must be performed by a qualified appliance
repair technician.
Cleaning
CAUTION: Do not immerse Toaster, cord, or plug in water or any
other liquid.
CAUTION: Be sure the Toaster is unplugged before cleaning.
CRUMB TRAY: Remove the Crumb Tray at bottom of the Toaster. Pull
the Crumb Tray away from the bottom of the Toaster, and allow the
crumbs to fall out.
We suggest that you do this over a sink or over a garbage can.
Wipe the Crumb Tray with a clean, damp cloth. Replace the Crumb
Tray, making sure to push firmly so that it is fully inserted in the
bottom of the Toaster.
EXTERIOR: Wipe the Toaster exterior with a clean, damp cloth.
Do not use abrasive cleaners. Do not put cord, or plug in water
or liquid.
Storage
Unplug unit, allow to cool, and clean before storing.
Store Toaster in its box in a clean, dry place.
Never store Toaster while it is hot or still plugged in.
Never wrap cord tightly around the appliance, use the Cord Storage
area on the bottom of the Toaster.
Do not put any stress on the cord where it enters the unit, as it could
cause the cord to fray and break.
9