User Maintenance Instructions - Russell Hobbs RH2MT Owner's Manual

User Maintenance Instructions

This Russell Hobbs
tenance. It contains no user-serviceable parts. Contact qualified
personnel if the product requires servicing.
CAUTION: Do not immerse Toaster, Cord, or Plug into water
or any other liquid.
Cleaning
To keep your Toaster operating properly, clean regularly. Do not
allow bread crumbs to accumulate in the Crumb Tray.
1. Unplug Toaster and allow it to cool completely before cleaning.
2. Remove any food which may have jammed in the Bread Slots.
Remove bread pieces with wooden tongs. Do not use fork,
knife, or other sharp metal objects as it may damage heating
elements.
3. Gently shake the Toaster to allow all crumbs to fall to into the
Crumb Tray. Set Toaster on a flat surface and carefully pull out
Crumb Tray.
4. Discard all crumbs in Crumb Tray. Wipe Crumb Tray clean with
a damp cloth. Always dry Crumb Tray thoroughly. Re-insert
Crumb Tray into Toaster. Be sure Crumb Tray is all the way in
and locks into position.
5. Wipe Toaster exterior with a damp cloth. Dry completely with a
soft cloth. DO NOT use harsh or abrasive cleansers as
these could damage the Toaster exterior.
Storage
1. Clean Toaster as instructed above.
2. Wrap Cord around Cord Storage Wrap on bottom of Toaster.
Never wrap cord tightly around the appliance. Do not put
any stress on the cord where it enters the unit, as it could
cause the cord to fray and break.
3. Store Toaster in its original box in a clean, dry location.
® 2-Slice Motorized Toaster requires little main-
10