Download Print this page

Reheating Toast; Hints And Tips; Care And Maintenance - Russell Hobbs RHT15 Series Instructions And Warranty

2 slice toaster

Advertisement

BAGELS
Leave the browning control at your preferred setting.
Warm the toaster up prior to toasting the bagel. Lower the bread carriage and leave for 15
seconds. Press the eject button.
Place the bagel into the slot; insert the bagel with the inside section of the bagel facing the
outer element. Lower the bread carriage lever, then press the
The
light will come on, and the toasting time and elements will be altered automatically
to brown and heat the bagel to your desired level of toasting.

REHEATING TOAST

Note: You must only reheat plain, "unbuttered" toast.
Place the bread into the toasting slot, lower the bread carriage lever, then press the
button.
The light will come on and the toasting time will be altered automatically to give a short
burst of heat to reheat the toast.

HINTS AND TIPS

When toasting more than one slice of bread, use slices of similar size, thickness and
freshness.
Old or thin bread will cook faster than fresh or thick bread, so use a lower setting.
Do not use torn, curled up, or misshapen slices of bread, as these may jam the ejection
mechanism and could catch fire.
Sweet bread products (fruit loaf, etc.) brown much quicker than ordinary bread, so should
be toasted on a lighter setting.
Should the bread carriage become jammed during the toasting cycle, do not attempt to
release it. Unplug the toaster and allow it to cool down before carefully removing the bread.
Do not use a knife, fork or similar sharp instrument as these may damage the elements and
present a danger of electric shock.
CRUMBS
Crumbs will collect in the base of the toaster. Letting them build up can cause a fire hazard so
it is important to remove them frequently.
Switch off the power and remove the plug from the wall power outlet.
Pull out the crumb tray and empty out the crumbs.
Wipe the tray clean with a damp cloth.
Dry thoroughly before sliding back into the base of the toaster.

CARE AND MAINTENANCE

Switch the power off and remove the plug from the wall power outlet.
Let the toaster cool down fully before attempting any cleaning operation or storing away.
Wipe the outer surfaces with a soft damp cloth. If necessary, use a little dishwashing
detergent.
Do not allow cleaning utensils, liquid or any foreign objects to enter the toasting slots,
as this may damage the elements and present a danger of electric shock.
• Remove, empty, clean and refit the crumb tray.
Do not use harsh or abrasive cleaning agents or solvents.
Do not use alkaline cleaning agents when cleaning this appliance.
Do not immerse the toaster in water or any other liquid.
button.

Advertisement

loading

This manual is also suitable for:

Chelsea