Sharp SD-NX10H Operation Manual page 172

Editing a Recorded MiniDisc (continued)
ENGLISH
E-45

To move a track
1
Whilst in the stop mode, select the track you want to move by
pressing the or button. Or start playing the track to be
moved, and then press the MD
2
Press the NAME/TOC EDIT button, and within 10 seconds, select
"MOVE" by pressing the REC LEVEL/CURSOR
3
Within 10 seconds, press the ENTER button.
4
Select the new track position by pressing the


To cancel the operation, press the NAME/TOC EDIT button.
5
Press the ENTER button again.


The track is moved, and the unit is stopped at the beginning of the track selected
in step 4.
button.
or button.
or button.