Sharp SD-NX10H Operation Manual page 164

Recording to a MiniDisc from a CD (continued)

Recording the desired tracks of the CD
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button and load the desired CD.
3
Load a recordable MiniDisc into the MD compartment.
4
Press the or
5
Press the TRACK button to programme the track number.
Selected track number
ENGLISH
E-37
button to select the desired track.
T-EDIT
6
Repeat steps 4 - 5 for other tracks. Up to 20 tracks can be pro-
grammed.


If more than 20 tracks are selected, "EDIT OVER" is displayed and the 21st track
will not be memorised.
7
Press the CD MD EDIT (HIGH/NORMAL) button to start record-
ing.
When the recording is finished, the selected tracks will be cleared.
To memorise a track whilst listening to it:
1 When you hear a track you want to record during playback, press the TRACK
button.


The track is memorised. (Maximum 20 tracks can be memorised.)
2 After the track is memorised, press the CD
3 Press the HIGH or NORMAL button to start recording.
To clear the memorised tracks:
Press the CD button whilst in the stop mode.
button to stop playback.