Aircraft Information - Safety 1st Go Hybrid Booster Manual

4358-4856 Go Booster 8/31/09
again or try another seating location.
Follow the directions in section E-2 to attach the tether to complete
the installation.
Remove the locking clip when the seat belt is not being used with
a child restraint.
D-6 Aircraft Information
12:02 PM Page 31
9.
Rebuckle Vehicle Belt
10.
Check Belt tightness
Grasp the child restraint at the
belt path with one hand. Push
and pull the child restraint from
side to side, forward and back.
The child restraint should not
move more than 1 inch.
NOTE: If it moves more than 1
inch, redo the steps 5 through 10
This child restraint is NOT
certified for aircraft use. Tether
anchors are needed when using
the harness system, which are
not available on aircraft. Lap and
shoulder belts are needed when
using as a belt-positioning
booster seat, which are not
available on aircraft.
29
D-7 Choose Position for Your Child
Your child's height, weight and age determine how your child
restraint should be used and placed in the vehicle.
22-65 lbs (10.1-29 kg)
and 34-52 in. (85.1-132.2
cm) and Over 1 Year Old
Forward-Facing using
5-point harness
Child and child restraint are
placed in the back seat, facing
the front of the vehicle.
40-100 lbs (18.1-45.4 kg)
and 43-57 in. (110.1-144.8
cm) and Over 1 Year Old
Belt-positioning booster
using vehicle lap/shoulder
belt combination
Child and child restraint are
placed in the back seat,
facing the front of the vehicle.
Harness system, headrest and
backrest are removed.
30