Advertisement
6. TroUbLe sHooTiNG
Fault
Pressure drop in the tank
Pressure switch valve leaks when compressor is
idle
compressor stops and does not restart
compressor stops and does not restart
compressor does not stop at max. pressure
compressor does not reach max. pressure
compressor noisy with metallic knock
parts support is available for this product. To obtain a parts listing and/or diagram, please log on to
www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
imporTANT: no liability is accepted for incorrect use of this product.
wArrANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
iNFormATioN: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
cause
Air leaks at connections
non-return valve seal defective
overload cut-out operated - motor overheating
motor failure
Pressure switch fault
filter clogged
Head gasket or valve fault
Bearing or piston damage
sole UK Distributor, sealey Group,
Kempson Way, suffolk Business Park,
Bury st. Edmunds, suffolk,
iP32 7Ar
Original Language Version
remedy
run compressor to max. pressure, switch off.
Brush soap solution over connections and look for
bubbles. tighten connections showing leaks.
if problem persists contact Authorised service Agent.
Empty the air tank, remove the non-return valve cap
'A' (fig.9) and clean. if necessary,
replace the seal 'B'.
Wait for motor to cool and restart.
contact Authorised service Agent.
contact Authorised service Agent.
replace filter element.
contact Authorised service Agent.
contact Authorised service Agent.
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
sAc89025VLn, sAc82425VLn
issue: 2 - 22/02/12
Advertisement
