Cooper Lighting Corelite Jaylum Suspended T5 Installation Manual

SAVE THESE INSTRUCTIONS
WARNINGS
1) WARNING! – Risk of Fire/Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.
2) WARNING! – Risk of Fire/Electric Shock. If not qualifi ied, consult an electrician.
3) WARNING! – Risk of Fire/Electric Shock. Luminaires wiring, ballasts, or other electrical parts may be damaged when drilling for installation of refl ector kit hardware. Check for
enclosed wiring and components.
NOTES
1) NOTE! – This product must be installed in accordance with local/ national electrical codes.
2) NOTE! – Only those open holes indicated in the photographs and/or drawings may be made or altered as a result of kit installation. Do not leave any other open holes in an
enclosure of wiring or electrical components.
3) NOTE! – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or any sharp objects.
4) NOTE! – Disconnect all power before proceeding.
CONNECTION AT FIXTURE
CROSS CABLE INSTALLATION
1 Insert Barrel Terminal
into keyhole slot.
2 Fully insert Toggle into
keyhole slot.
3
Install Screw(s)
CABLE/GRIPPER INSTALLATION
Slide Cable Coupler onto Main Suspension Cable
1
and secure Coupler to appropriate mounting point
at ceiling.
2
Install Cable Gripper onto Main Suspension Cable.
Insert Cross Cable into Cable Gripper and install
3
thumbscrew.
Loosen thumbscrew to level xture. Re-tighten
as necessary once xture leveling has been
completed.
4
Adjust Main Cable to desired length and cut
excess cable if necessary.
! IMPORTANT: Install CABLE CRIMP prior to
cutting cable.
Not all options available. Please consult your Cooper Lighting Representative for availability. Speci cations and Dimensions subject to change without notice.
12" Aircraft Cable with Barrel Terminals
and Steel Toggles (included).
2
1
1
2
3
JAYLUM INSTALLATION
Suspended T5/T8 Luminaire
POWER FEED
J-BOX
(by others)
Cable Coupler
Cable SJT Cord
Please refer to Corelite "Connection at Ceiling" instructions
for detailed information on various mounting methods.
NON-POWER FEED
Cable Coupler
Cable
Cable Crimp
4
ADE130026