Olympus FR-WR Instructions Manual page 15

x If you connect an older type of commercial fl ash with a voltage of approx. 350 V or
higher, the wireless receiver will malfunction.
x If you connect a fl ash with a communication terminal that does not meet the
Olympus standard, the wireless receiver may malfunction.
Preparing the Receiver
Inserting the batteries (sold separately) Inserting the batteries (sold separately)
Batteries to use
Choose from the following batteries.
• AAA NiMH batteries (x 2)
• AAA alkaline dry-cell batteries (x 2)
x AAA manganese batteries are not usable.
Inserting the batteries
1
Open the battery compartment cover.
2
Insert the batteries.
• Make sure that the polarity (+/-) is
correct.
3
Close the battery compartment cover.
15
EN