Advertisement
Quick Links
BLUE MOVER 500 FSCAN
Blue laser with 15K optical fast scanning motor
M
A
N
U
A
L
V
E
R
S
I
O
N
1
.
0
30 / 11 / 10
128 pre-programmed fast scanning moving effects
500mW blue laser @450nm
Scanner system: 15K high speed optical scanner
PC IDLA input and output / 12 channel DMX512 operation
Pre-programmed moving patterns in Auto mode
Sound-to-Light, Auto and DMX modes
Linkable Master/Slave mode
3 pin XLR DMX connection
AC 110V-240V, 50/60Hz input power / Rated power: 40w
Key operated safety control / Safety mounting point
Adjustable hanging bracket / Tough metal chassis
Dimensions: 280 x 100 x 250mm
For the latest instruction manual updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
Due to continuous product development, specifications and appearance are subject to change.
© Copyright Lamba plc 2010. E&OE.
Advertisement
Related Manuals for KAM BLUE MOVER 500 FSCAN
Summary of Contents for KAM BLUE MOVER 500 FSCAN
- Page 1 For the latest instruction manual updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
- Page 2 Thank you for purchasing this product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. After you have read the instructions, please retain them for future reference. This unit has been tested at the factory before being shipped to you.
-
Page 3: Sound-To-Light
Front and Rear panel view 1. Laser Aperture 2. Sound active microphone 3. Sound active indicator: Blue 4. Power indicator: Red 1. Power Jack 2. ON/OFF switch 3. Key lock 4. DMX or linking jack 5. Sound sensitivity knob 6.Pattern Size knob 7. - Page 4 Universal DMX Operation (DMX mode) This mode allows you to use universal DMX-512 console to operate. 1. Install the units in a suitable position. 2. Use standard XLR cable to connect your units together via the XLR connector on the rear of the units. For longer cable we suggest a terminator at the last fixture.
-
Page 5: Troubleshooting
Trouble shooting 1. If the power supply indicator is off and the laser doesn't work, please check the power supply and the input voltage. 2. In Standalone operation, if the power supply indicator is ON and sound active indicator is OFF, but the laser doesn't work.
Need help?
Do you have a question about the BLUE MOVER 500 FSCAN and is the answer not in the manual?
Questions and answers