Installation With Lower Anchor Connectors; Which Type Of Lower Anchor Connector Is On Your; Child Restraint; Installation With Lower Anchor Hooks - Evenflo Secure Kid Owner's Manual

Installation with Lower Anchor
Connectors
LATCH is a system for attaching the child restraint to your
vehicle seat. It is to be used in place of your vehicle's seat
belts and can be used in vehicles with LATCH anchors. Your
vehicle owner's manual may refer to this system as ISOFIX,
Universal Anchorage System (UAS), or Lower Universal
Anchorage System.
WARNING
• ONLY use for securing child restraint to lower anchor bars.
• ALWAYS read and follow exactly the instructions which
accompany your vehicle and child restraint.
• NEVER attach two hooks to one vehicle lower anchor bar.
• DO NOT use the vehicle seat belts to install a child
restraint when using the Lower Anchor Connector
Assembly.
• This Lower Anchor Connector Assembly is intended to be
used ONLY as described in these instructions.
Serious injury or death may result from misuse.
• ALWAYS be sure that the Lower Anchor Connector hook is
fully engaged onto the Vehicle Lower Anchor Bar by pulling
hard on the Lower Anchor Connector strap. If it is not
totally engaged, the Lower Anchor Connector Assembly
will not secure your child restraint. Serious injury or death
may result.
• To avoid a strangulation hazard, you
unused lower anchor connector assembly, with all slack
removed, in storage area on the back of the seat. Roll or
fold excess lower anchor connector strap and secure with a
rubber band to prevent serious injury to vehicle occupants.
• In addition to these instructions, read and follow your
vehicle owner's manual regarding installation of child
restraints and LATCH. If there is a discrepancy, follow your
vehicle owner's manual.
14
DO NOT install by this
method for a child weighing
more than 22.6 kg (50 lb).
MUST store the
Which Type of Lower Anchor Connector
is on Your Child Restraint?
In order to properly install your child restraint with the
LATCH system, you must first know which type of LATCH
connectors are present on your child restraint.
• If your child restraint has LATCH Hook Connectors,
begin installation by referring to "Installation with LATCH
Hook Connectors," below.
• If your child restraint has SureLatch Connectors, begin
installation by referring to page 18, "Installation with
SureLatch Connectors."
• If your child restraint has the Quick Connectors, begin
installation by referring to page 22, "Installation with
Quick Connectors."
Lower Anchor SureLatch™
Hooks
Connector

Installation with Lower Anchor Hooks

IMPORTANT:
• Some vehicle manufacturers have lower maximum
weight ratings for LATCH anchors. Consult your vehicle
owner's manual, or call the vehicle manufacturer, to
confirm the limits on your vehicle's LATCH anchors.
• If you are using the vehicle seat belt to secure the child
restraint, DO NOT use the Lower Anchor Hooks.
• Install this child restraint with the vehicle seat belt
(NOT Lower Anchor Hooks) if the child weighs more
than 22.6 kg (50 lbs).
Quick
Connector™
1. Disconnect Tether
Hook and Lower
Anchor Hooks
from the back of
the child restraint.
15