Positioning The Crotch Strap - Evenflo Secure Kid Owner's Manual

Child restraint
Table of Contents

Advertisement

Positioning the Harness Strap
3. Move harness strap.
Remove both harness straps from the slots and feed
them into the new slot, as shown.
Pull the harness strap to the back of the child
restraint.
Note: Straps must be positioned at the child's
shoulder level or slightly above.
IMPORTANT: When inserting harness straps through the
slots in the seat pad, make sure you route them correctly
through their corresponding slots in the seat shell.
IMPORTANT: Make sure
both harness straps are
installed completely on the
splitter plate, as shown.
32
4. Attach harness
straps to splitter
plate.
Attach the loop at the
end of each harness strap
onto the splitter plate.

Positioning the Crotch Strap

As your child grows, you will need to change the crotch
strap position so that it is in the slot closest to your child.
The crotch strap should
ALWAYS
to, but
NEVER
under, the child's bottom.
IMPORTANT: You
MUST
slot if your child weighs 18 kg (40 lbs) or more.
be as close as possible
place the crotch strap in the front
1. Remove crotch
strap.
Loosen the harness
straps and move them
out of the way.
Push the anchor up
through the slot to
the top of the seat.
2. Insert crotch strap
into new slot.
Insert the crotch strap
anchor into the slot
that is the closest to
the child AND the
most comfortable for
the child.
Pull the crotch strap to
make sure it is secure.
33

Advertisement

Table of Contents
loading

Table of Contents