IBM xSeries 455 Installation Manual page 30

Hide thumbs Also See for xSeries 455:

Table of Contents

xSeries 455: Installation Guide

a. Remove the microprocessor baffle from the microprocessor socket. Keep

the microprocessor baffle for future use.

b. Remove the protective tape covering the microprocessor socket, if there is

any.

Attention:

Inserting the microprocessor in a locked connector might

damage the pins and cause the microprocessor to fail.

c. Make sure that the socket lock is in the fully unlocked position to permit

inserting the microprocessor. Use the hex wrench that is provided with the

microprocessor option to open the lock, if necessary.

Note: Examine the socket lock of an installed microprocessor to identify

the locking flag in the locked position.

Unlocked

Attention:

When you handle static-sensitive devices, take precautions to

avoid damage from static electricity. For details about handling these devices,

see "Handling static-sensitive devices" on page 8.

d. Touch the static-protective package containing the microprocessor to any

unpainted metal surface on the server. Then, remove the microprocessor

and power module from the package.

Locked

Locking

flag

Table of Contents