Install The Hardware - National Instruments NI-XNET Installation Manual

Install the Hardware

This section describes how to install your hardware on the
PCI/PCI Express, PXI/PXI Express, and USB buses, as well as
how to install XNET C Series modules.
Install Your PCI/PCI Express Hardware
Caution
package, touch the antistatic plastic package to a metal
part of your system chassis to discharge electrostatic
energy, which can damage components on your CAN,
LIN, or FlexRay card.
1. Make sure that your computer is powered off and unplugged.
NI-XNET Hardware and Software Installation Guide | © National Instruments | 3
If you are using LabVIEW Real-Time (RT),
Note
refer to the LabVIEW Real-Time (RT)
Configuration section of Installation and
Configuration in the NI-XNET Hardware and
Software Help for more information about
installing the NI-XNET software on your RT
system and verifying the installation.
Before you remove the card from the