Table of Contents
Advertisement
English
If water or other liquid spills into this equip-
ment, do not continue to use it. Continued use
may lead to fire. Unplug the power cord
immediately and contact your dealer or a
Seiko Epson service center for advice.
Do not use aerosol sprayers containing
flammable gas inside or around this product.
Doing so may cause fire.
CAUTION:
Do not connect cables in ways other than
those mentioned in this manual. Different
connections may cause equipment damage
and burning.
Be sure to set this equipment on a firm, stable,
horizontal surface. The product may break or
cause injury if it falls.
Do not use in locations subject to high humidity
or dust levels. Excessive humidity and dust may
cause equipment damage or fire.
Do not place heavy objects on top of this
product. Never stand or lean on this product.
Equipment may fall or collapse, causing
breakage and possible injury.
To ensure safety, unplug this product before
leaving it unused for an extended period.
Before moving the product, unplug it and
unplug all cables connected to it.
If ink leaks out of the printer, wipe up the ink
with a cloth or similar material immediately
and contact your dealer or a Seiko Epson
service center for advice.
Restriction of Use
When this product is used for applications
requiring high reliability/safety, such as
transportation devices related to aviation, rail,
marine, automotive, etc.; disaster prevention
devices; various safety devices, etc.; or functional/
precision devices, etc.; you should use this
product only after giving consideration to
including fail-safes and redundancies into your
design to maintain safety and total system
reliability. Because this product was not intended
for use in applications requiring extremely high
reliability/safety, such as aerospace equipment,
main communication equipment, nuclear power
control equipment, or medical equipment related
to direct medical care, etc., please make your own
judgment on this product's suitability after a full
evaluation.
Purpose of This Manual
This manual provides information to operators of the
TM-C100 printer to describe basic operations to
enable safe and correct use of the printer. (Depending
on printer models, some of the illustrations may be
slightly different from your printer; however, the
instructions cover all models, except as noted.
Illustrations are provided at the end of this manual.)
Notes on Usage–Illustrations
A, D, E
❏ Be sure to use the POWER switch to turn the
printer on and off.
❏ When turning off the AC adapter directly, be
sure to wait for more than 10 seconds after all
printer operations have finished and then turn
off the power of the AC adapter.
❏ Connect the AC adapter to the power
connector of the printer and then plug the AC
adapter into the outlet.
❏ When opening the printer cover, be sure not to
touch the flat cable or the ink tube inside the
open area and avoid damage to the parts by
not applying force.
❏ When closing the printer cover, push the top of
the cover gently until it is closed firmly.
❏ Be sure not to open the printer cover when the
printer is operating.
❏ During printing, be sure not to touch the
release lever. If the paper entrance is opened
during printing (the release lever will stay in
the open position if you open it), a paper end is
detected and printing is not performed
correctly.
❏ Protect the printer from impact.
❏ Do not apply excessive force to the printer
case.
❏ Do not place food or beverages such as coffee
on the case of the printer.
❏ If the power is cut during printing for any
reason, such as a blackout, restore the power as
soon as possible. If the power is not restored to
the printer for about 2 weeks, the printing
nozzles may become permanently clogged.
Notes on Installation
❏ Be sure that the printer is installed
horizontally.
❏ Do not install the printer in a dusty place.
❏ Cords or other foreign objects must not be
caught on the printer.
Notes on Transportation
❏ Be sure to remove the ink cartridge.
❏ Be sure the printer is packed and shipped right
side up.
❏ Be sure not to transport any ink cartridge that
has been removed from its packing. Otherwise
the ink might leak.
To transport this printer, follow these steps:
1. Turn off the power supply.
2. Check that the POWER LED is off.
3. Remove the paper and ink cartridge if they are
installed.
4. Remove the power supply connector and
other connectors.
5. Remove the paper supply device.
Unpacking
The following items are included for the standard
specification printer. If any item is damaged,
contact your dealer.
❏ Printer
❏ AC adapter (The power cord may be provided
in the package.)
❏ Exclusive ink cartridge
❏ User's Manual (this manual)
❏ Paper tray
❏ Cable hook (Used to keep cables in place. See
illustration N.)
❏ Paper supply device
2
Advertisement
Table of Contents
