Table of Contents
Advertisement
(3) Install the suspension bolts.
(Use either an M8 – M10 size bolt or the
equivalent)
Use a hole-in anchor for existing ceilings,
and a sunken insert, sunken anchor or
other field supplied parts for new ceilings to
reinforce the ceiling to bear the weight of the
unit.
Adjust clearance (2 – 4 in.) from the ceiling
before proceeding further.
NOTE
• All the above parts are field supplied.
5. INDOOR UNIT INSTALLATION
Installing optional accessories (except for the decoration panel) before installing the indoor unit
is easier. For existing ceilings, install Fresh air intake kit and branch duct before installing the
unit.
As for the parts to be used for installation work, be sure to use the provided accessories and specified
parts designated by Daikin.
(1) For new ceilings
(1-1) Install the indoor unit temporarily.
• Attach the hanger bracket to the suspension bolt. Be sure to fix it securely by using a nut and
washer (3) from the upper and lower sides of the hanger bracket.
The washer fixing plate (7) will prevent the washer from falling.
Tighten
Nut
(double nuts)
(Field supplied)
[Securing the hanger bracket]
Fig. 7
(1-2) Refer to the paper pattern for installation (5) for ceiling opening dimension.
Consult the builder or carpenter for details.
• The center of the ceiling opening is indicated on the paper pattern for installation.
The center of the unit is indicated on the paper pattern for installation.
• Fix the paper pattern to the unit with screws (6) (×4).
9
Washer (3) (accessory)
Hanger bracket
<Installation Example>
Ceiling slab
Anchor
Long nut or turn-buckle
Suspension bolt
False ceiling
Fig. 6
Insert
Washer fixing plate (7)
(accessory)
[Securing the washer]
Fig. 8
3P184443-12N
(Unit:in.)
English
Hide quick links:
Advertisement
Table of Contents
