TechniSat DIGIT Series Short Manual page 3

Card reader for smart cards*:
> Insert the smart card (gold chip facing
down, towards the slot) until it stops,
into the card reader.
* Depending on model
Illustrations - Remote control
Sound On/Off
Numeric keys
Option
Sound/Subtitle selection,
special functions
Arrow key up
Programme +
Arrow key left
Volume -
Arrow Key Down
Programme -
EPG
Programme +/-
Sleep timer
Video text*
On/Mix/Off
*Remote control options:
It is possible to operate two receivers, one TV
set as well as video recorder with the same
encoding with this remote control by switching
the remote control option.
Important operating instructions
Through the use of the so-called "On Screen Display" (screen projection,) the use of the Digital-Receiver is
made easy and the number of remote control keys is reduced. All functions are shown on the screen and can
be manipulated with just a few keys.
Inserting the CI-Module**:
> Please take the CI-Module and card manufacturer's
instructions into account.
> Insert the desired smart card into the respective CI-Module.
> Insert the CI-Module carefully into the slot.
** if available
On/Stand-by
Multi-function keys
OK
Programme list On/Off
Arrow key right
Volume +
Back
Info
TV/Radio
Volume +/-
Menu On/Off
EXTERNAL
Stop/Freeze-frame
> To change the remote control option
press the required (SAT1, SAT2, VCR or
TV) key and OK simultaneously!!! Please
note: To control this receiver, you have to
select mode Sat 1.
4
Functions that belong together are grouped in menus. The chosen function is highlighted in color.
On the bottommost line, the "function keys" are highlighted with red, yellow, green and blue bars.
These bars have different functions in each menu that are called up by pressing the respective
colored key (multi-function key) on the remote control. The "function keys" are only active when
the shortcut symbol is shown in the particular field.
Help
If included, a help text can be faded in or out by pressing the blue function key in the menu.
Initial Installation
When operating the unit for the first time, the start window of the installation assistant Auto Install
appears. Please follow the instructions on the screen.
If the initial installation is not run or canceled, the unit will be started with the standard
configuration.
For daily use
Switching on and off
> Turn on the Digital-Receiver by pressing the On/Standby button on the remote control or on the unit
itself.
> By pressing the button again, the unit is turned off.
Choosing programmes
Using the up/down keys:
> Switch programmes, one at a time, using the up/down programme keys on the remote control or on the
unit.
Using the number pad:
> Us ing the number pad input the programme number. For example:
1 for programme 1
1, then 4 for programme 14
2, then 3, then 4 for programme 234.
When inputting programme numbers, you have about 3 seconds after pressing a key to complete
the number. If you have a single or double-digit number to input, you can speed up the process by
holding the last key pressed.
Using the programme list:
> Press the "OK" key.
> Now you can choose the programme you wish by using the up and down arrow keys.
> By pressing the "OK" key, the highlighted programme is selected.
> With the up and down arrow keys, you move the highlighted area up or down one line.
> With the left and right arrow keys, you change list pages.
Returning to the last selected programme:
> By pressing the "back" key on the remote control, the last selected programme is re-selected.
> Press the key again and the last programme seen is selected.
After each programme change, an Info box appears with the programme number and name of
5