Advertisement
Quick Links
QUICK START GUIDE
Cordless Advanced 500 Series
1
Unit Prep
A. Charge unit for 4 hours
by placing the magnetic
charger on the front of
the unit.
This device is only compatible with voltages of 100-240 VAC, 50/60Hz
Magnetic
Attachment
Fill
Insert
B. Insert tip until it clicks
into place. To remove tip,
push the tip eject button.
C. Lift the flip top on reservoir
and fill with warm water.
Refill as needed.
Caution:
Do not press tip
eject button while
unit is running.
©2018 Water Pik, Inc.
Advertisement
Related Manuals for Waterpik waterflosser 500 Series
Summary of Contents for Waterpik waterflosser 500 Series
- Page 1 QUICK START GUIDE Cordless Advanced 500 Series Unit Prep Insert Magnetic Caution: Attachment Do not press tip eject button while unit is running. A. Charge unit for 4 hours B. Insert tip until it clicks by placing the magnetic into place. To remove tip, charger on the front of push the tip eject button.
- Page 2 QUICK START GUIDE QUICK START GUIDE Cordless Advanced 500 Series Cordless Advanced 500 Series Water Floss Unit Prep Insert Mode Magnetic Caution: Attachment Do not press tip eject button while unit is running. A. Press mode button to B. Turn power ON. Close adjust pressure.