Central Machinery 66435 Set Up And Operating Instructions Manual page 22

• WArNING!
the Upper Pulley Cover (92) after
adjusting the cutting speed or re-
placing the V-Belt (128).
(See Figure N.)
4. TRANSMISSION GEAR AND WORM
GEAR SHAFT MAINTENANCE: The
Transmission Gear (107) and Worm
Gear Shaft (112) run in an oil bath
Gear Box and should not require an
oil change more than once a year,
unless the oil becomes contaminated
or a leak occurs due to improper
replacement of the Gear Box Cover
(109). Changing this oil should be
done by a qualified service techni-
cian.
5. AFTER USE,
of the tool with clean cloth.
6. Keep the Head Screw (17) clean and
lubricate periodically.
7. WArNING! If the Power Supply
Cord (97) of this Bandsaw is dam-
aged, it must be replaced only by a
qualified service technician.
SKU 66435
Always securely close
clean external surfaces
For technical questions, please call 1-800-444-3353.
FIGUrE AA
GEAr BOx COVEr
(109)
HEx HEAD SCrEW
(110)
WOrM
GEAr SHAFT
(112)
TrANSMISSION
GEAr
(107)
Page 22