Download Print this page

Advertisement

Quick Links

DEAR CUSTOMER
Thank you for purchasing your new piece of furniture from Dunelm.
We put a lot of effort in the design and construction of our products to ensure they set
the standard for quality, durability and ease of assembly.
If for any reason you feel we haven't lived up to the high standards we set ourselves,
please don't hesitate in contacting us on 08451 656565 where our team will be very
keen to understand what has gone wrong and, more importantly, put it right.
DEAR CUSTOMER
The next step...
There is no need to feel daunted by the number of parts and ttings in front of you, we have
compiled this straight forward, step-by-step guide to make sure that assembling your furniture
is as easy as 1, 2, 3.
Before you begin, we advise that you check that you have everything you need to get started.
TOP TIP
Find a space to spread these out across the oor before you begin
assembling them. Lay each panel down in position, ready to build.
It is recommended that two people assemble this product together.
The full list of furniture parts, xtures and ttings, as well as the tools you will need for assembly,
can be found on pages 2, 3 and 4 of this manual.
TOP TIP
Identify all of the ttings, make sure that you have them all prepared
and familiarise yourself with each component, to make things easier
when you are putting it all together.
Safety and Care Advice
IMPORTANT - The rst step you need to take is to ensure your safety!
Please take the time to read and understand these instructions before assembling your
furniture.
Keep children and animals away from the assembly area.
This furniture contains small parts that could cause choking if swallowed.
Keep all plastic wrapping materials away from children to avoid danger of suffocation.
Ensure that all packaging is disposed of carefully and responsibly.
Make sure that you allow enough space to move around when assembling your furniture.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Soho Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Dunelm Soho Series

  • Page 1 DEAR CUSTOMER Thank you for purchasing your new piece of furniture from Dunelm. We put a lot of effort in the design and construction of our products to ensure they set the standard for quality, durability and ease of assembly.
  • Page 2 Parts & Fittings for Soho Small Sideboard (30149782 / 30149737) Panel - exploded view Panels - plan view Top Panel (90x40cm) Left Side Panel (59x39.9cm) Bottom Panel (90x40cm) Right Side Panel (59x39.9cm)
  • Page 3 Drawer left side panel x3 (35x14cm) Divider Panel Shelf (41.5x35.6cm) (59x37.6cm) Drawer right side panel x3 (35x14cm) Drawer back panel x3 Drawer front x3 (36.5x14cm) (42x19.3cm) Left door (42x58.5cm) Drawer bottom panel x3 (37.5x34.8cm) Front rail (41.6x7.6cm) Back Panel x2 (60x42.6cm) Fittings 36mm Connecting bolt x12...
  • Page 4: Tools Required

    Wall strap x2 13mm Washer x2 350mm Runner x6 Leg x4 12mm Screw x1 Tools required Cross slot screwdiver Hammer Tape measure The use of power tools to assemble the product is not recommended due to the risk of Before you start Check the pack and make sure you have all the parts listed above.
  • Page 5 Divider Panel Slot Outlet Fully insert locking cams on the boards, Screw connecting the slot always points bolts as far as shown to the outlet of holes. Do not over tighten.
  • Page 6 Right Side Panel Slot Outlet Fully insert locking cams on the boards, Screw connecting the slot always points bolts as far as shown to the outlet of holes. Do not over tighten. Slot Outlet Fully insert locking Hit wooden dowel cams on the boards, gently by hammer.
  • Page 7 Screw connecting bolts as far as shown Do not over tighten. Slot Outlet Fully insert locking cams on the boards, the slot always points to the outlet of holes.
  • Page 8 12mm Screw connecting bolts as far as shown Do not over tighten.
  • Page 10 Screw connecting bolts as far as shown Do not over tighten. Low edge (With Groove)
  • Page 11 Slot Outlet Fully insert locking cams on the boards, the slot always points to the outlet of holes.
  • Page 12 Fixing unit to the wall。 a. Using suitable screw system, x wall straps the wall. b.Fix other end of wall straps underneath top panel with washer screw Important note: It is essential that this product is fixed to a wall using the strap supplied. Wall fixing is not supplied.
  • Page 13 Nearly There! Note: If the gaps between drawers need to be adjusted, you can change the screw hole positions on slides as illustrated and adjust the drawers.
  • Page 14: Care And Maintenance

    From time to time check that there are no loose screws on this unit. This product should not be discarded with household waste. Take to your local authority waste disposal centre. Finally, we hope you enjoy your furniture for many years to come and thanks again for your purchase. dunelm.com...