Rainbow Turbo Carnival Clubhouse Assembly Instructions Manual page 51

Step 11
*NOTE: If not installing Picnic Table, skip to Step 13.
1. Measure up 14" from bottom of Corner Uprights (6129) and attach 4 Hole Facias (4050) to Corner
Uprights (6173) (6174) using 3/8" Hardware (H3) (H116).
*NOTE: 4 Hole Facias (4050) must run in the same direction as the Main Beams (6175).
2. Layout and attach Short Picnic Seat Boards (3133), Picnic Seat Boards (3134) and Picnic Table
Boards (4054) to 4 Hole Facias (4050) using #8 Hardware (H155).
*NOTE: Picnic Seat Boards (3134) (4054) should overhang 4 Hole Facias (4050) 2 7/8" (as
shown) when properly installed.
3. Center Seat Runners (3146) on underside of Picnic Seat Boards (3133) (3134) (4054) and attach
using #8 Hardware (H155).
6174
4050
H155 3134
2 7/8"
4054
4050
Picnic Table
Installation
6173
3133
3146
3134
50
6174
H3 H116
4050 H155
4054
3133
6173
14"
H3
H116