Cochlear Freedom Quick Start Manual page 3

How to:
Turn on and off
Change program
Change sensitivity
Change volume
Switch to Telecoil
Button lock feature
– for younger
children who may
'accidentally' change
the settings.
To return to default
settings
Earhook
The ear hook can be remoulded to fit the ear better by immersing it
in hot water for a few minutes and then bending it to fit. To remove
the ear hook from the processor unit, pull firmly and twist.
Press and hold selector button for a few
seconds until display shows current program.
Push the selector button briefly, continuing
until the correct P number is on screen
Press increase or decrease button once. The
letter 'S' will appear on the screen. Now
press the increase/ decrease buttons until the
desired level is reached.
Press the increase or decrease button once
and then press it again for slightly longer.
You may hear a beep and you will see a 'V' on
the screen. Now use the increase/ decrease
buttons to find the right volume setting.
Press the increase and decrease buttons at
the same time. You will see 'T' on the screen.
The telecoil is now activated. To deactivate,
repeat the same procedure. The clinic will
decide if the Telecoil should be used in
conjunction with the microphones or not.
If this is activated, it will not be possible to
change the settings using the buttons. To
activate press the decrease and selector
buttons at the same time. You will see +L on
the screen. To deactivate, repeat the same
procedure and you will see -L on the screen.
To return to the default settings from the last
clinic appointment, press and hold all three
buttons at the same time for a few seconds.
You will hear a beep. The screen will go
blank and then return to normal.