Table of Contents
Advertisement
!
NOTE
◆ When
Rostep M2
is under the normal mode or the beginner mode, the transporter body will be powered off automatically and keep
connected with the remote controller after idling for more than 10 minutes; if the transporter body is under the sleep mode (R ostep
M2 is under the idle status for more than 18 hours or the keys
will be powered off automatically.
3.6 List of Key Functions
Transporter body is started
Press: To power off the transporter body under non-riding status,
and no effect under person-riding status. Hold down: To power
off the remote controller
Press: To honk the horn
Hold down: To mute/unmute
Press: To enter the assistant mode under the non-riding
status
Press: No effect under person-riding status
Press: To turn on/off the headlamp
and
of the remote controller are pressed), the remote controller
Transporter body is
powered off
Press: No effect
Hold down: To power
off the remote controller
Press: No effect
Hold down: To
mute/unmute
Press: To start the transporter body and
enter the normal mode
Press: To start the transporter body and enter the
beginner mode
7
Advertisement
Table of Contents
Need help?
Do you have a question about the M2 and is the answer not in the manual?
Questions and answers