Table of Contents
Advertisement
Image 5-1
Mounting on a mounting plate
The PROFIBUS OBTs have two holes. These allow mounting on any flat surface, for
example on the mounting plate of a cabinet.
Drill two holes in the mounting plate as shown in the drilling template in Figure 5-2.
Secure the module with two machine screws (for example M3 x 75 and M3 x 55).
Make sure that there is a reliable electrical connection between the terminal
housing and the grounded mounting plate using a grounding cable of at least 2.5 mm
PROFIBUS Optical Bus Terminal (OBT)
Operating Instructions, 04/2016, C79000-G8976-C122-07
Mounting a module on a DIN rail
Commissioning
5.2 Installation
of the module
.
2
21
Advertisement
Table of Contents
