Cisco UCS B460 M4 Installation And Service Note page 11

Overview
An upgrade kit is available to upgrade the Cisco UCS B260 blade server to the UCS B460 M4 blade server.
The upgrade kits includes the following parts:
• One UCS Scalable M4 Blade Module
• One UCS Scalability Connector that attaches to the front of the blade modules and connects them to
form the four-socket blade server.
The two UCS Scalable M4 Blade Modules in the UCS B460 M4 blade server are in a master-slave relationship.
The lower module is the master, and the upper module is the slave. The KVM cable, USB flash drive, and
SD cards must be configured in the master blade module of a B460 M4 blade server; if they are configured
in the slave module, they will not operate.
See Upgrading to a Cisco UCS B460 M4 Blade Server, on page 37
B460 M4 blade server.
There are two versions of the UCS B460 M4 blade server. The following table lists the features of each version.
Table 2: Features of the UCS B460 M4 Blade Server
Feature
Base server PID
Form factor
Number of CPUs
CPU Model
Memory type
Memory slots
LSI3008 SASRAID Controller
Drive Quantity
Mezzanine slots
Secure digital (SD) cards
Internal USB device
Trusted platform module (TPM)
Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v3 and E7 v2 CPUs
UCS B460 M4 with Intel Xeon E7 v2
CPU
UCSB-EX-M4-1
Full width, double height
4
Intel Xeon E7 v2
DDR3 DIMMs
96
2 that supports 4 SAS or SATA
hard drives
4 HDD or SSD
4 + 2x mLOM
2
1
1
The Cisco UCS B460 M4 Blade Server
for the instructions to upgrade to a UCS
UCS B460 M4 with Intel Xeon E7 v3
CPU
UCSB-EX-M4-2
Full width, double height
4
Intel Xeon E7 v3
DDR3 DIMMs
96
2 that supports 4 SAS or SATA
hard drives
4 HDD or SSD
4 + 2x mLOM
2
1
1
3