Cisco SCE8000 Removal And Replacement Procedures page 25

Chapter 9 Removal and Replacement Procedures
Verifying the Installation
Part number: 73-10598-01 38
Revision:
Software revision:
LineCard S/N : CAT1202G07D
Power Supply type: AC
SML Application information is:
No application is configured.
Logger status: Enabled
Platform: SCE8000 - 4x10GBE
Management agent interface version: SCE Agent 3.1.6 Build 134
Software package file: ftp://ftpserver/simba.pkg
SCE8000 uptime is 9 minutes, 54 seconds
After you verify installation of a Cisco SCE 8000 module and check connectivity, you must configure
the module. For complete information on configuring the Cisco SCE 8000 platform, see the
Cisco SCE8000 10GBE Software Configuration Guide. For information on all Cisco SCE 8000 platform
commands, see the Cisco SCE8000 CLI Command Reference document.
Cisco SCE8000 10GBE Installation and Configuration Guide
9-25
OL-26784-02