Safety Warnings - Cisco Catalyst 1000 Series Hardware Installation Manual

Safety Warnings

Warning
Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury and
equipment damage. Statement 48
Warning Read the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware
or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
Statement 378
Warning
Connect USB Device to a Certified USB Port. Statement 388
Warning
To avoid or reduce the risk of personal injury, do not use the product if the product has been exposed to
irregular environmental conditions, if the product has been misused or if parts of the product have been
damaged. Consult qualified service personnel. Never try to service the product yourself. Statement 0416
Warning
To reduce the risk of electric shock, fire or personal injury, do not place power cables in areas where they
may be walked on or damaged by items placed upon or against it. Statement 0417
Warning This product is intended for use in a normal environment based on the standard IEC60950-1 and IEC62368-1.
Do not use the product in vehicles, on board ships, in aircrafts or in medical applications with physical
connection to the patient, nor in environments with exposure to moisture, dust, vibration or ingress of water.
Statement 0418
Warning Equipment is intended for installation in Information Technology Equipment Rooms. Suitable for installation
in Information Technology Rooms in accordance with Article 645 of the National ElectricalCode and NFPA
75. Statement 0444
Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement
1001
Warning
Read the installation instructions before connecting the system to the power source. Statement 1004
Cisco Catalyst 1000 Series 24-Port and 48-Port Switch Hardware Installation Guide
12
Switch Installation