Anlagenkonzeption Rohrleitungsführung (Abb. 1 und 2, Seite 14) Auf gute Zugänglichkeit zur Ablesung und Bedienung der Mess- und Zusatzgeräte achten. Einbaulage des Zählers (mit oder ohne Impulsgeber): • Messgeräte nicht mit dem Ablesekopf nach unten einbauen. • Durchflussrichtung (Pfeil) beachten. •...
Einbau Einbauort Auf gute Zugänglichkeit zur Ablesung und Bedienung der Mess- und Zusatzgeräte achten. • Umgebungstemperatur beachten (max. -10 °C...60 °C) und Anlagekonzeption berücksichtigen. Achtung: Elektromagnetische Einflüsse (z. B. Ölbrenner-Magnetventil) sind zu beachten. Als Grundregel gilt ein Sicherheitsabstand von ca. 40 cm von der elektromagnetischen Quelle. Vorbereitungen für den Einbau Messgeräte, Montagematerial kontrollieren.
Elektrische Anschlüsse Anlagekonzeption berücksichtigen. • Spannungsdaten, Betriebsdaten • Maximale Übermittlungslänge • Kabelquerschnitte, -länge • Umgebungstemperatur, Montageposition Kabelende für den Anschluss vorbereiten, einführen und in der Kabelverschraubung fixieren. Steckklemme abziehen und a) Adern anschliessen (Polarität beliebig) b) Steckklemme wieder fest einsetzen Schutzdeckel festschrauben.
DFM 20S DFM 25S 16.0 Garantie, Haftung Aquametro garantiert im Rahmen der Allgemeinen Geschäftsbedingungen für die Qualität der Produkte. Aqua- metro-Geräte werden nach ISO-Normen und -Richtlinien hergestellt. • Einbau- und Bedienungsanleitung beachten! • Gerät nur für den bestimmten Verwendungszweck einsetzen.
Plant design Layout of piping (Pict. 1 and 2, page 14) Easy access for reading the meter and controlling the ancillary equipment is important. Mounting position of the meter (with or without pulser): • Do not mount the meter with the head pointing downwards. •...
Mounting Place of mounting Easy access for reading the meter and controlling ancillary equipment is essential. • Observe the operating temperature range (-10 °C...60 °C) and plant conception points. Warning: Electromagnetically effects are to be avoided (e.g., magnetic valve of the burner). A basic rule is a security distance from the electromagnetically source of about 40 cm.
Electrical connections Pay attention to plant design point. • Power data, operation data • Maximum transmission length • Cable cross section, length • Ambient temperature, mounting position Prepare cable connection, insert into and fasten it with the cable gland. Pull off the plug terminal a) Connect wires (arbitrary polarity) b) Reeinsert plug terminal firmly Fix protective cover.
DFM 25S 16.0 Guarantee, liability Aquametro guarantees within the bounds of the general terms of business for its products. Aquametro units are built according to ISO norms and directives. • Please observe the mounting and operations instructions ! • Use the unit exclusively for its designed purpose.
Conception Tracé de la conduite (Fig. 1 et 2, page 14) Veiller à une bonne accessibilité pour le relevé du compteur et le maniement des accessoires. Position de montage du compteur (avec ou sans émetteur d‘impulsions): • Ne pas monter les compteurs la tête vers le bas. •...
Montage Lieu de montage Veiller à une bonne accessibilité pour le relevé du compteur et le maniement des accessoires. • Tenir compte de la température ambiante (max. -10 °C...60 °C) et „conception de l’installation“. Attention : Les influence électromagnétiques (p.ex. vanne électromagnétique de chauffage) sont a observées. La règle de base est une distance de sécurité...
Branchements électriques Observer point „conception“. • Caractéristiques techniques • Longueur de transmission maximale • Section, longueur de câbles • Température ambiante, position de montage Préparer l’extrémité des câbles pour le raccordement, insérer et fixer dans le passe-câble à vis. Ouvrir les bornes enfichables et a) raccorder les fils (polarité...
DFM 25S 16.0 Garantie, responsabilité Aquametro garantit dans le cadre des conditions générales pour la qualité des produits. Aquametro produit ses appareils selon les normes et les directives ISO. • Observer les instructions de montage et d’utilisation! • N’utiliser le compteur que pour la fonction à laquelle il est destiné.