Advertisement
Quick Links
PRECISION MEASURING INSTRUMENTS
DIAL INDICATOR
Thank you for purchasing the Niigata Seiki Dial Indicator.
Used with a Magnetic Base or Indicator Stand, this gauge will show the change in height or
position of a surface relative to a zero point set at a reference surface.
■ APPLICATIONS
●For safe and correct use of this product, please read this instruction manual before use and follow
the procedures described. Please keep manual where it is accessible to user for future reference.
●Keep this manual with the instrument if transferred or leased to a third party.
●For inquiries about this product, please contact dealer or Niigata Seiki at the address listed on the
following page.
■PART IDENTIFICATION & FUNCTION
※ Model WTI-8038RL shown
① Pointer
(Needle)
② Scale
Plate
① Pointer .........
Shows measurement on the
Scale Plate.
② Scale plate ...
Graduated to show reading.
Turn Bezel to rotate.
③ Probe .........
Feeler which contacts workpiece.
④ Bezel .........
Rotate to turn Scale Plate.
PROFESSIONAL
• Deep grooves and tight locations wher
Deep grooves and tight locations where standard indicator can n
be used.
be used.
• Use on milling machines and laths for centering, measure runout,
parallelism, flatness, etc.
• Mount on height gauge for various measur
Mount on height gauge for various measurements.
WTI-8038RL
④ Bezel
③ Probe
(Stylus)
INSTRUCTION MANUAL
Model
WTI - 8038RL/WTI - 8038WL
No.
(LONG PROBE)
⑤ Dovetails
⑤ Dovetails ......
⑥Stem .........
⑦ Stem Mount ...
⑧ Groove .........
⑨ Spanner .........
e standard indicator can not ot
ements.
[Accessories]
⑦ Mount
（φ6･φ8mm）
⑧ Dovetail
groove
⑨ Probe Spanner
...
For attaching Stem.
...
...
For mounting to Holder.
Connects Stem to gauge.
...
Matches Dovetail in gauge
body for mounting Stem.
Tool to change Probe.
⑥ Stem
Advertisement
Related Manuals for Niigata seiki WTI-8038RL
Summary of Contents for Niigata seiki WTI-8038RL
- Page 1 Please keep manual where it is accessible to user for future reference. ●Keep this manual with the instrument if transferred or leased to a third party. ●For inquiries about this product, please contact dealer or Niigata Seiki at the address listed on the following page.
-
Page 2: Safety Precautions
●Temperature within range of 0~40°C、humidity 30~70% (non-condensing.) ●Location with minimal dust, oil, oil mist, and protected from direct sunlight. WTI-8038RL ● Location protected from use by children and unauthorized people. Use in location contrary to the above may ●... - Page 3 HOW TO USE - Preparation ① ⑤ Dovetail Attach Mounting Stem. ⑤ Dovetail Loosen the Stem mounting bracket and slide the groove Insert onto the Dovetail in the desired position. Tighten the Stem to secure. (Choose a stem with diameter to match the Gauge Holder you plan to use.) ⑧...
-
Page 4: Troubleshooting
(For reference, we recommend a calibration interval of 3~4 months when used in a factory.) Outside Japan, Please contact distributor or place of purchase to inquire about calibrations services. Niigata Seiki Co., Ltd. 5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055 +81-256-33-5522 FAX : +81-256-33-5518 MAIL: intl.sales@niigataseiki.co.jp URL: http://www.niigataseiki.co.jp...