WIRE ROPE CALIPER
Thank you for purchasing the Wire Rope Calipers.
This product is designed for measuring wire rope diameter with precision and repeatability.
●For safe and proper use of this product, please read this instruction manual before use and follow the procedures
described. Keep this manual with the calipers for future reference.
●Keep this manual with the instrument if transferred or leased to a third party.
●For inquiries about this product, please contact dealer or Niigata Seiki at the address listed on the following page.
■PARTS IDENTIFICATION AND FUNCTION
②Measuring
Surfaces
①Jaw ...................... For positioning on Object to be measured.
②Measuring ........... Surfaces for measuring Outside Dimension
Surfaces of object.
③LCD Display ........ Displays digital measurement.
④Lock Screw ......... Tighten to Prevent the slide and display from
moving.
⑤ [ HOLD ] Button ....... Will Hold value on Display.
SAFETY PRECAUTIONS
Always follow the proper operating procedures in order to prevent
harm to yourself or others, and to prevent damage to property.
WARNING
Read this manual and follow the instructions.
・ Use of product other than as described in the manual
may cause accident.
Use only for measuring.
・ Use for any purpose other than measuring may
cause damage or wear to the instrument. Improper
use may also cause accident.
Handle with Care.
・ Do not drop or subject instrument to excessive shock.
Do not place under heavy objects. Improper handling
may cause damage or poor accuracy.
・ Do not scratch instrument.
Before use, make sure measuring surfaces and
slide are clean of dirt and debris.
・ Debris may cause damage to Display Unit or
erroneous reading.
①Jaw
⑦ [ ON/OFF ] Button
⑧ [ ZERO ] Button
Indicates risk of personal injury or property damage if not followed.
③LCD Display
④Lock Screw
⑤ [ HOLD ] Button
⑥Output Connector
mm
⑨Battery Cover
⑥Output Connector
※1
⑦ [ ON/OFF ] Button ........ For turning power ON / OFF.
⑧ [ ZERO ] Button ........... Resets display to 0.00mm.
⑨Battery Cover .......... Cover for Silver Oxide SR44 Battery.
⑩Scale ....................... Supports LCD Display Unit.
Please Observe
Denotes a prohibition
-You MUST NOT do
Use and store only in environment meeting the
following conditions:
●Dry location protected from rain, water, and oils.
●Location that does not become hot.
●Location protected from use by children and
unauthorized people.
・ Use in places contrary to the above may cause
damage to the product resulting in accident or injury.
Avoid using in locations with high electric fields, such
as near fluorescent lights or switching power supplies.
・ May cause damage to Display Unit or erroneous
reading.
When Lock Screw is tight, do not slide the Display Unit.
・ Will cause damage to Gauge.
Do not disassemble or modify.
・ Doing so may cause accident or injury. Please
contact distributor or place of purchase for service.
User Manual
WR-100
Model No.
⑩Scale
※1
.. Connector external output.
※1:This feature not available.
Denotes a requirement
-You MUST do