Connect To Devices Through S/Pdif; Browse Storage Devices - Philips Screeneo S6 User Manual

Connect to devices through
S/PDIF
Connect a digital device (e.g. a home cinema
system or sound bar) to the projector through
S/PDIF connection. With this connection, audio
is streamed to the connected digital device.
1 Using an S/PDIF optical cable, connect the
S/PDIF connector on the projector to the S/
PDIF input on the digital device.
• S/PDIF input on the digital device might
be labeled OPTICAL or OPTICAL IN.
SERVICE
SERVICE
16
HDMI1/ARC HDMI2 S/PDIF
HDMI1/ARC HDMI2 S/PDIF
7 Browse storage
devices
Through the projector, you can access and play
the pictures, audio and video files stored on the
local storage and connected storage devices
(e.g. a USB flash drive, HDD, camcorder or
digital camera).
1 Using a USB cable, connect the
(either USB 2.0 or USB 3.0) on the projector
to the USB port on your storage device.
• The USB 3.0 port provides faster data
transfer speed.
SERVICE
SERVICE HDMI1/ARC
2.0 3.0
2 On the home screen (press
Navigation buttons to select
the upper right of the screen, then press OK
to access the options.
3 Select File Manager, and select your
connected device or local storage when
prompted for device selection.
4 The content browser is displayed. Use the
navigation buttons and OK on the remote
control to select and open files.
To copy/cut/delete files
Select a file, and then press
control to access the editing options.
To paste files
Copy a file and navigate to a folder, then press
on the remote control to access the Paste
options.
port
HDMI1/ARC HDMI2 S/PDIF
HDMI2
S/PDIF
), press the
located on
on the remote
Philips · Screeneo S6