Power Control Settings; Restore Default Settings; Clear Memory Storage; Check Memory - Philips Screeneo S6 User Manual

Table of Contents

Advertisement

Bluetooth speakers: Enable or disable
Bluetooth connection when the
projector is in standby.

Power control settings

1
Press
Select Power, and then press OK to access
2
the power control options.
Use the Navigation buttons and OK to
3
select and change:
Shutdown: Turn off the projector
immediately.
Timed Shutdown: Select a time option
or customize a period of time so
that the projector turns off after the
specified period.

Restore default settings

1
Press
2
Use the Navigation buttons and OK to
select Software Update - Factory Reset.
3
Follow the on-screen instructions to start or
cancel resetting.
Notice
After resetting to the default settings,
all the files and apps you installed are
completely erased. Back up your files if
you need to reset the projector.

Clear memory storage

You can clear browsing history (such as
cookies), installation package and system
memory stored on the local storage.
1
Press
Use the Navigation buttons and OK to
2
select Cleaner.

Check memory

You can check the total and available memory
(RAM and internal memory) of the local
storage.
1
Press
2
Use the Navigation buttons and OK to
select About.
20
.
.
.
.

10 Service

Cleaning

DANGER!
Instructions for cleaning!
Before cleaning, always turn the
projector off and disconnect the power
cable.
Use a soft, lint-free cloth. Never use
liquid or easily flammable cleansers
(sprays, abrasives, polishes, alcohol,
etc.). Do not allow any moisture to
reach the interior of the projector.
Do not spray the projector with any
cleaning fluids.
Wipe over the surfaces gently. Be
careful that you do not scratch the
surfaces.
Clean the lens
Use a soft brush or lens cleaning paper for
cleaning the lens of the projector.
DANGER!
Do not use any liquid cleaning agents!
Do not use any liquid cleaning
agents for cleaning the lens, to avoid
damaging the coating film on the lens.
Clean the vents
1
In case there is much dust or lints
accumulated inside the vents of the
projector, you may remove the ventilation
grilles on two sides of the projector.
2
Use a soft cloth or brush to remove dust
and lints inside the ventilation grilles.
Philips · Screeneo S6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scn650

Table of Contents