Nivel System CL3D Manual page 2

Safety
WARNING: do not look straight into laser beam. Use laser according to the manual.
Construction
Cross laser housing is secured by rubber cover (protection against damage due to
breakdown or impact). In set as standard you can find CL3D cross laser batteries,
strap, casing and bracket (magnet wall shelf, geodetic tripod adapter)
Markings on panel
Modulation indicator (working with sensor)
Power indicator
Compensator blockade indicator
Modulation button
Laser display line button
Compensator blockade mode
Set the switch in the middle position to block the compensator (now you can work
with bent beam). In this case red diode will light up indicates the blockade of
compensator.
In case of low battery diode will start to blink slowly.