Polycom VVX250 Startup Manual page 2

Your quick start guide
2 1
3
4
Installing Your DECT Phone
The box for your handset will contain a number of items:
• The main phone chassis
• A plastic 'foot' which should be attached to the base of the chassis
• A handset receiver
• A curly wire to attach the receiver to the main chassis
• An RJ45 Ethernet cable to connect the handset to your local network
If you have ordered a power supply unit (PSU) then this will be provided separately. Note that the phone does not need a PSU if your
network supports power over Ethernet (POE).
The phone has a second Ethernet port which can be used to attach another device (e.g. your PC) to the same network port in your office.
The phone also supports the use of a headset which should be attached using an RJ9 square type connecting cable to the appropriate
socket on the rear of the chassis.
Once the handset is powered and connected to your network it should boot up ready for use, with the correct extension number, date and
time displayed on the screen.
In the event that the handset does not boot up correctly then please contact our Support team.
5 7 6 8
1 Line Keys
18
2 Reversible Tab
3 Speaker
17
4 Back Key
16
5 Transfer Key
15
6 Hold Key
7 Volume Keys
14
13
8 Dial Pad
9 Mute Key
12
10 Speakerphone Key
11
11 Headset Key
10
12 USB Port
13 Home Key
14 Navigation keys / Select Key
15 Soft Keys
9
16 Security slot (on back)
17 Screen
18 Message Waiting Indicator