Agilent Technologies M1205A V26 Service Manual page 116

$JLOHQW 0$ 99 6HULHV 6HUYLFH *XLGH
7DEOH  (UURU &RGH /LVWLQJ IRU 'HYLFH ,'  &RQWLQXHG
6WDWXV /RJ
6WDUWXS (UURUV
(UURUV
450
500 - 699 01F4H - 02BBH
700 - 799 02BCH - 031FH
800 - 899 0320H - 0383H
900 - 914 0384H - 0392H
915 0393H
916 - 919 0394H - 0397H
920 0398H
921 - 999 0399H - 03E7H
1000 - 1031 03E8H - 0407H
1032 - 1063 0407H - 0427H
1064 - 1095 0428H - 0447H
 8VLQJ 6XSSRUW )XQFWLRQV
3RVVLEOH
&DXVH
No response from the utility CPU
to a request for the VUF revision
Software problem
Communication problem between
two CPUs
Configuration problem
Something within the System
memory has changed unexpect-
edly. This is usually caused by a
RAM problem.
One of the CPUs has failed to send
a test message to the next CPU.
Something within memory has
changed unexpectedly (see error
range 900-914).
Indicates a missing 32 ms interrupt
on the CPU. This could be caused
by a poor connection or a failure
on the Util CPU.
Something within memory has
changed unexpectedly (see error
range 900-914).
Missing mandatory card
Wrong boot firmware
Insufficient MPB RAM on CPU
&RUUHFWLYH
$FWLRQ
System Configuration problem - refer to
the corrective action description in the
appropriate section after this table.
Replace System Board.
Refer to the System Configuration
Problem corrective action description in
the appropriate section after this table.
Refer to the Hardware/Software prob-
lem corrective action description in the
appropriate section after this table.
System Configuration problem - refer to
the corrective action description in the
appropriate section after this table.
RAM problem - refer to the corrective
action description in the appropriate
section after this table
Replace the System Board
RAM problem - refer to the corrective
action description in the appropriate
section after this table.
Replace System Board
RAM problem - refer to the corrective
action description in the appropriate
section after this table.
System Configuration problem - refer to
the corrective action description in the
appropriate section after this table.
System Configuration problem - refer to
the corrective action description in the
appropriate section after this table.
Hardware/Software problem - refer to
the corrective action description in the
appropriate section after this table.