L-Acoustics Kara Owner's Manual page 44

Inspection and preventive maintenance
3. Insert the pin in each storage and rigging hole. Pull and rotate the pin.
The pin must remain inside the hole.
If the pin is inserted in two plates, the ball must pass through both plates and lock the pin in place.
If the check fails, immediately withdraw the product from use and contact L-Acoustics.
Repair kits (KR)
Kara KR PIN621 (Kit 10 pins short round head screws & rivets
SB18 KR PIN601 (Kit 10 pins long T-shaped head screws & rivets)
M-BUMP KR PIN601 (Kit 10 pins long T-shaped head screws & rivets)
KR PIN621 (Kit 10 pins short round head screws & rivets)
M-BAR KR PIN665 (Kit 10 pins 9.5mm diameter screws & rivets)
KARA-MINIBUEX KR PIN601 (Kit 10 pins long T-shaped head screws & rivets)
Related tasks
Rigging part inspection (p.36)
44
Pins (p.143)
Pins (p.161)
Pins (p.166)
Pins (p.167)
Pins (p.170)
Pins (p.174)
Kara owner's manual (EN) version 1.0