Symbols - Craftsman 125.ID20A Operator's Manual

Some of the following symbols may be used on this product. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate
the product better and safer.
SYMBOL
V
A
Hz
W
min
Alternating Current
C lass II Construction
.../min
Wet Conditions Alert
Read The Operator' s Manual
No-Hands Symbol

SYMBOLS

NAME
Volts
Amperes
Hertz
Watt
Minutes
Direct Current
No-load Speed
Per Minute
Eye protection
Safety Alert
Hot Surface
Recycle Symbol
6 ― English
DESIGNATION/EXPLANATION
Voltage
C urrent
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed,
orbits, etc., per minute
Do not expose to rain or use in damp
locations.
To reduce the risk of injury, user must
read and understand operator' s manual
before using this product.
Always wear eye protection with side
shields marked to comply with ANSI Z87.1.
Precautions that involve your safety.
Failure to keep your hands away from the
blade will result in serious personal injury.
To reduce the risk of injury or damage,
avoid contact with any hot surface.
This product uses lithium-ion batteries. Local, state,
or federal laws may prohibit disposal of batteries in
ordinary trash. Consult your local waste authority
for information regarding available recycling and/or
disposal options.